1. Connect the external power cord. The red indicator gives off a flashing red light. Hold down the ON / OFF button for 3 seconds. The device is now on.
2. Press the ON / OFF button to adjust your personal intensity level (strength). Level 1 is the lowest and level 6 the highest. We recommend that you perform a skin test on each skin area before starting your treatment. This is to identify which intensity level suits you and your skin tone.
3. Aim the appliance at the hair area. When the device is in contact with the skin, the indicator lights up pink. Press the light flash button to start treatment. Hold down the light flash button for 3 seconds to automatically flash. This is the so-called "slide function", the red indicator then turns blue.
For single flashes. Aim the appliance at the hair area and press the light flash button to treat.
For the sliding function. Hold down the light flash button for 3 seconds. The indicator then turns blue. The device will automatically emit light flashes until the device has left the skin.
When the device is on but not in use, it enters sleep mode after 5 minutes. The device is restarted by holding down the ON / OFF button for 2 seconds.
To turn off the device. Hold the ON / OFF button for 3 seconds, the fan will continue to cool the unit and after 1 minute it will turn off.
Use a cotton swab or a dust-free cloth with medical alcohol and clean the light exit window and stains on the glass. Wear the supplied safety goggles to avoid eye damage.